![Non PVC Soft Bag IV Solution Filling Machine](http://resourcewebsite.singoo.cc/image/614ae1751312b.jpg)
- Tel: 0086-13507449007
- E-mail: sales@marya.com.cn
As professional pharmaceutical non PVC soft bag IV solution filling machine manufacturer, our non-PVC multi-layer co-extrusion film infusion bag has the characteristics of non toxic, strong compatibility with the liquid medicine, no water leakage or air leakage, long keeping period, high temperature resistant of 121℃ (during sterilization for example), suitable for low temperature storage and convenient transportation. Also in the process of injection, no need to add inlet tube which eliminates the secondary pollution, and recycling used empty iv bags doesn‘t pollute the environment either.
Apart from the non PVC soft bag IV solution filling machine, we also have the abilities to provide whole pharmaceutical project solution for new starters who need from A to Z, including water treatment machine, solution preparing & manufacturing unit, filling machine and packing system, and even cleanroom system as well.
Welcome for contact for customized solution!
No. |
Item |
Parameter |
Note |
1 |
Material of soft bags |
Polypropylene double winding multilayer flat film, the thickness difference between layers is not more than 10%. |
|
2 |
Allowable thickness of soft bag film; |
Maximum 10% |
|
3 |
Inner diameter of film coil: |
Minimum 150mm |
|
4 |
Outer diameter of film coil: |
Maximum 600mm |
|
5 |
Soft bag specification |
100ml,250ml,500ml,1000ml |
|
6 |
Soft bag printing |
Thermal transfer printing, monochrome |
|
7 |
Printing area |
Maximum 200 x 120 mm for each bag |
|
8 |
Seal method |
Contact heating seal |
|
9 |
Welding temperature |
100°C – 170°C ± 2°C |
|
10 |
inner diameter of printing film coil |
76,2 +1 mm |
|
11 |
outer diameter of printing film coil |
Maximum 150 mm |
|
12 |
capacity |
Max 5000bags / hour, 500 ml * * based on non foam products, the liquid pressure is between 1 and 4 kg/cm + 0.2 cm². |
|
13 |
Change of specification time |
About 1 hour |
|
14 |
Temperature stability of filling system |
Max: 50° C
|
|
15 |
Filling liquid |
Standard intravenous infusion |
|
16 |
Filling range |
50ml,100ml,200ml,250ml,300ml,500ml,1000ml |
|
17 |
Filling precision |
50ml±1ml、100ml±1ml、200ml±1.25ml、250ml±1.5ml、300ml±1.75ml、500ml±2.5ml、1000ml±5ml |
|
18 |
filling system |
mass flowmeter connected to pneumatic diaphragm valve |
|
19 |
Sterilization |
The filling system is sterilized online at 121 °C, including in-place cleaning / in-place steam system. |
|
20 |
Liquid supply |
The liquid must be pressurized to the filling system through a pump or pressure tank (1 - 4 kg/cm kg/cm 0.2). |
|
21 |
Emergency stop button |
All electrical and pneumatic control functions will be switched off after starting the emergency stop switch. |
|
22 |
Power supply |
3 x 460 V +PE / N + 15 % / - 5 % |
|
23 |
Power consumption |
About35 kW |
|
24 |
Sensor |
All sensors are equipped with socket / socket connector as far as possible so that they can be easily disassembled when necessary. When the sensor is replaced, there is no need to rearrange the new lines. |
|
25 |
Compressed air |
6 kg / square centimeter. It is free from grease and dry. |
|
26 |
Pneumatic exhaust |
Centralized gas supply and exhaust system |
|
27 |
Suction capacity |
About 3500 L/min,18 °C |
|
28 |
Cooling water |
About 300 L/hour,15--20°C |
|
29 |
Running noise |
Maximun 75db |
|
30 |
Indoor humidity required |
50 % +/- 5 % |
|
31 |
Indoor temperature required |
20 °C +/- 2 °C |
|
32 |
Overall dimension |
8000mm×2850mm×2100mm |
|
33 |
Total weight |
8000kg |
|
34 |
Material |
All steel components contacting the liquid solution are made of stainless steel 316L. Other parts in contact with the product, such as hoses and gaskets, are made of non-toxic materials. No chemical reaction occurs with the liquid. They can withstand the disinfection temperature of 125°C. They do not emit particles. They are anti-wear, anti-aging and do not deform. All other components are of various quality stainless steel. All materials conform to Chinese industrial standard. |
|
35 |
Operator |
One person is fixed. Second operator work only when they need to replace the film. |
|
36 |
Operator language |
English |
|
![Pharmaceutical Ampoule Washing Sterilizing Filling Sealing Production Line](http://resourcewebsite.singoo.cc/15707921993482117/en/image/phone_617275bd71995.jpg)
![Automatic Vial Washing Sterilizing Filling Stoppering Capping Production Line](http://resourcewebsite.singoo.cc/15707921993482117/en/image/phone_617370e704a9d.jpg)
![Automatic Glass Vial Washing Sterilizing Filling Stoppering Capping Production Line](http://resourcewebsite.singoo.cc/15707921993482117/en/image/phone_6163d207a67eb.jpg)
![Automatic Glass Ampoule Washing Sterilizing Filling Sealing Production Line](http://resourcewebsite.singoo.cc/15707921993482117/en/image/phone_6163d68fc1ab2.jpg)