Non-PVC Soft Bag Iv-solution Production Line Manufacturers|Marya

Non PVC Soft Bag IV Solution Filling Machine

Home > Products > Pharmaceutical Filling Production Line > Non PVC Soft Bag IV Solution Filling Machine

Tel: 0086-13507449007
E-mail: sales@marya.com.cn

Main Usage for Non PVC Soft Bag IV Filling Machine
Technical Parameters for Non PVC Soft Bag IV Filling Machine

The non PVC soft bag IV solution filling machine is mainly used for manufacturing Non-PVC soft bag packaged I.V. infusion products, like normal saline(also known as Sodium chloride), glucose, Glucose sodium chloride, etc. The soft bag iv solution manufacturing plant can automatically complete the procedures of film opening, printing, bag-making, liquid filling, cap feeding, cap welding, sealing and bag out putting. The soft bag form fill seal machine can also be equipped with auxiliary equipment such as soft bag-feeding, sterilizing, leak-checking, lamp-checking and finish the whole production of soft bag I.V solution.

As professional pharmaceutical non PVC soft bag IV solution filling machine manufacturer, our non-PVC multi-layer co-extrusion film infusion bag has the characteristics of non toxic, strong compatibility with the liquid medicine, no water leakage or air leakage, long keeping period, high temperature resistant of 121℃ (during sterilization for example), suitable for low temperature storage and convenient transportation. Also in the process of injection, no need to add inlet tube which eliminates the secondary pollution, and recycling used empty iv bags doesn‘t pollute the environment either.

Apart from the non PVC soft bag IV solution filling machine, we also have the abilities to provide whole pharmaceutical project solution for new starters who need from A to Z, including water treatment machine, solution preparing & manufacturing unit, filling machine and packing system, and even cleanroom system as well.

Welcome for contact for customized solution!

No.	Item	Parameter	Note
1	Material of soft bags	Polypropylene double winding multilayer flat film, the thickness difference between layers is not more than 10%.
2	Allowable thickness of soft bag film;	Maximum 10%
3	Inner diameter of film coil:	Minimum 150mm
4	Outer diameter of film coil:	Maximum 600mm
5	Soft bag specification	100ml,250ml,500ml,1000ml
6	Soft bag printing	Thermal transfer printing, monochrome
7	Printing area	Maximum 200 x 120 mm for each bag
8	Seal method	Contact heating seal
9	Welding temperature	100°C – 170°C ± 2°C
10	inner diameter of printing film coil	76,2 +1 mm
11	outer diameter of printing film coil	Maximum 150 mm
12	capacity	Max 5000bags / hour, 500 ml * * based on non foam products, the liquid pressure is between 1 and 4 kg/cm + 0.2 cm².
13	Change of specification time	About 1 hour
14	Temperature stability of filling system	Max: 50° C
15	Filling liquid	Standard intravenous infusion
16	Filling range	50ml,100ml,200ml,250ml,300ml,500ml,1000ml
17	Filling precision	50ml±1ml、100ml±1ml、200ml±1.25ml、250ml±1.5ml、300ml±1.75ml、500ml±2.5ml、1000ml±5ml
18	filling system	mass flowmeter connected to pneumatic diaphragm valve
19	Sterilization	The filling system is sterilized online at 121 °C, including in-place cleaning / in-place steam system.
20	Liquid supply	The liquid must be pressurized to the filling system through a pump or pressure tank (1 - 4 kg/cm kg/cm 0.2).
21	Emergency stop button	All electrical and pneumatic control functions will be switched off after starting the emergency stop switch.
22	Power supply	3 x 460 V +PE / N + 15 % / - 5 %
23	Power consumption	About35 kW
24	Sensor	All sensors are equipped with socket / socket connector as far as possible so that they can be easily disassembled when necessary. When the sensor is replaced, there is no need to rearrange the new lines.
25	Compressed air	6 kg / square centimeter. It is free from grease and dry.
26	Pneumatic exhaust	Centralized gas supply and exhaust system
27	Suction capacity	About 3500 L/min，18 °C
28	Cooling water	About 300 L/hour，15--20°C
29	Running noise	Maximun 75db
30	Indoor humidity required	50 % +/- 5 %
31	Indoor temperature required	20 °C +/- 2 °C
32	Overall dimension	8000mm×2850mm×2100mm
33	Total weight	8000kg
34	Material	All steel components contacting the liquid solution are made of stainless steel 316L. Other parts in contact with the product, such as hoses and gaskets, are made of non-toxic materials. No chemical reaction occurs with the liquid. They can withstand the disinfection temperature of 125°C. They do not emit particles. They are anti-wear, anti-aging and do not deform. All other components are of various quality stainless steel. All materials conform to Chinese industrial standard.
35	Operator	One person is fixed. Second operator work only when they need to replace the film.
36	Operator language	English